The two sides of the top were held together with pins / wedges:
And weighed down with paint pots :)
And the main body:
Thursday 3 December 2015
Telecaster build - joining the body and top
I want this guitar to be light, so it's going to be heavily chambered, this necessitates a separate body and top. I ordered two piece top and bottoms, and planed the edges square and joined them.
The two sides of the top were held together with pins / wedges:
And weighed down with paint pots :)
And the main body:
The two sides of the top were held together with pins / wedges:
And weighed down with paint pots :)
And the main body:
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment